Results 1 to 5 of 5

Thread: PCConfig (various versions) +WIN10

  1. #1
    Join Date
    Jan 04, 2016
    Location
    Libertyville Illinois
    Posts
    17
    Thanks
    7
    Thanked 1 Time in 1 Post
    Country: United States

    Default PCConfig (various versions) +WIN10

    Hi all

    I FINALLY "took the plunge" and got a new computer. It is running WINDOWS 10.

    Does anyone know if the various versions of PCConfig are WIN10 compatible (I have 1 loaded and it does open, doesnt mean it wont brick the radio)? Also I have a serial port programming cable, aside from buying a new usb version, are there any know usb to serial converters that I could use (have other radios which I may want to try and program from this machine).

    Thank you in advance.

    Merry Christmas and Happy New year to all!




    Howard


  2. #2
    Join Date
    Mar 14, 2012
    Location
    New York, NY
    Posts
    57
    Thanks
    22
    Thanked 13 Times in 4 Posts
    Country: United States

    Default

    I've had good luck using PCC 2.18.2 and PCTune 3.0.14 on Win10 without issue (incl. radio reading/writing). I'm also able to run and use PCC 2.12.6 and PCC 2.10.2, though I've not attempted to use them to read/write a radio.
    - Bryan
    "So the best solution is to paint them to blue color and throw them to the sea?" in reference to MTS2000 F01/93.

  3. #3
    Join Date
    Nov 22, 2013
    Location
    Wisconsin
    Posts
    27
    Thanks
    1
    Thanked 3 Times in 2 Posts
    Country: United States

    Default

    I also have had no isues with my Windows 10 machine and several version of PCC even 1.28.0.8

  4. #4
    Join Date
    Feb 04, 2012
    Posts
    1,512
    Thanks
    45
    Thanked 183 Times in 98 Posts

    Default

    One large factor to look at when using any software with win 10 is to see if the software runs in 64bit or 32bit environments. Some software will tell you what OS systems it works in. If win 10 is not one then be prepared for issues. Sometimes it will run but fail to communicate with the hardware. Trial and error is the only method at that point.

    For the USB adapter I have read many posts where the poster had had success with a FTDI based USB to serial adapter.

  5. #5
    Join Date
    Dec 17, 2015
    Posts
    21
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Country: United States

    Default

    I've run pretty much every single version of PCC on my Windows 10 x64 laptop without issues. Win 10 is pretty good compatibility-wise with most software, and PCC isn't really an exception.

    As Notarola said, though, if you're using a USB serial adapter, make sure it's a high quality FTDI or similar adapter. The cheaper ones do not, in my experience, work as intended especially during firmware upgrades.