Results 1 to 3 of 3

Thread: Thales Liberty stuck in Busy Channel Lockout

  1. #1
    Join Date
    May 22, 2012
    Posts
    660
    Thanks
    266
    Thanked 365 Times in 173 Posts
    Country: United States

    Question Thales Liberty stuck in Busy Channel Lockout

    So I have a legitimate Liberty. I brought this up some years ago but never got a solution to it, just thought I'd check in and see if any solution was ever found.

    The Liberty I have seems to be stuck in Busy Channel Lockout and won't transmit until the received carrier drops on carrier squelch channels. It works fine on PL-decode enabled channels.

    Very annoying for using on repeaters that don't transmit a PL tone, as you have to wait for the repeater to unkey before you can reply.

    As I recall, I'm using the very latest Liberty firmware, 06.22.11.0027.

    I had a now-locked thread from 2014 going on this (https://communications.support/threa...-Inhibit-Issue), but never got anywhere with it. Thoughts?


  2. #2
    Join Date
    Jan 12, 2015
    Posts
    161
    Thanks
    15
    Thanked 19 Times in 15 Posts
    Country: United States

    Default

    Being that Thales is no longer in the PS business I doubt that there will ever be a firmware fix for the issue.

  3. #3
    Join Date
    May 22, 2012
    Posts
    660
    Thanks
    266
    Thanked 365 Times in 173 Posts
    Country: United States

    Default

    Agreed. I just thought perhaps someone may have come up with something in the last four years.