• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

16 channel limitation removal

Status
Not open for further replies.

snig64

Contributing Member
Joined
Aug 27, 2012
Messages
59
Has anyone figured out how to add more than 16 channels to a zone? I know this is done because of the 16 linked systems, but I have a lot more channels I want than just 16 in a channel, and then 16 to scan from.
.
Does the EVX5400 CE142 software show that it can have more than 16 channels per zone?
 

radio313

Prolific Contributor
Joined
Feb 13, 2012
Messages
194
my 4550 has alot more then 16 channels in a zone :)
HT's .. dont think possible
 

com501

Prolific Contributor
CS Forums $upporter
Joined
Jan 18, 2013
Messages
2,792
Portables with no stop on the channel knob are unlimited, like the 7550, the 6550 has a hard limit of 16 on the channel per zone. Mobiles have no limitations, except how long you can scroll before you drive off the road.....


Just remember, if you try to drag a zone from a 7550 to a 6550 the software will bonk at you if there are more than 16 modes in the zone.
 
OP
S

snig64

Contributing Member
Joined
Aug 27, 2012
Messages
59
Thanks for the information. I do see now you can continue adding on the 4550.

Now, can anyone remove the pesky 16 scan limit? I have my Vertex 4204 scanning 37 channels right now.
 

mfr334

Contributing Member
Joined
Apr 22, 2012
Messages
99
Has anyone figured out how to add more than 16 channels to a zone? I know this is done because of the 16 linked systems, but I have a lot more channels I want than just 16 in a channel, and then 16 to scan from.
.
Does the EVX5400 CE142 software show that it can have more than 16 channels per zone?

Looks like CE142 limits you to 16 channels a zone, so guess no continous rotary on them.
 
Status
Not open for further replies.