Results 1 to 2 of 2

Thread: Upgrading a very old MTH800

  1. #1
    Join Date
    May 12, 2020
    Posts
    5
    Thanks
    2
    Thanked 4 Times in 2 Posts
    Country: Croatia

    Default Upgrading a very old MTH800

    I am quite new to Tetra and I came across and old MTH800 that I need to upgrade to a newer firmware so I can use the same codeplug and CPS on all radios.


    MTH800 runsR07.000.5343. I use an old CPS version 6C.417.01 to program that radio (only works on WinXP).
    I would like to upgrade the radio to MR 5.14.3 (R07.000.8195). I use CPS 7.3 for the newer radios.

    Please help me with the procedure of that upgrade, step by step.

    Thanks a lot!!
    Kris


  2. #2
    Join Date
    May 12, 2020
    Posts
    5
    Thanks
    2
    Thanked 4 Times in 2 Posts
    Country: Croatia

    Default

    I found the solution on an other forum, you can lock this thread. If someone needs the info about the update of old radios, just send me a PM