Results 1 to 2 of 2

Thread: VX-P829 FPP

  1. #1
    Join Date
    May 25, 2013
    Location
    Guilford CT
    Posts
    23
    Thanks
    24
    Thanked 3 Times in 2 Posts
    Country: United States

    Question VX-P829 FPP

    I have FPP enabled in CE76 and wrote a fresh codeplug to the radio. Now how do I get into the FPP mode in the radio?


  2. #2
    Join Date
    Oct 16, 2012
    Posts
    29
    Thanks
    7
    Thanked 2 Times in 2 Posts

    Default

    Hold the two side buttons when you power the radio up. The default password should be 123456. Make sure your channel selector is set on channel 1. You can cycle through the zones with the side buttons and once you pick the appropriate zone click your channel knob over to channel 2 and you can use the side buttons to pick the channel you want to edit. Channel selection 3 and up are the parameters for the channel you're editing. Pressing the orange button on top will cycle your menu selection from 1-16 to 17-32. I believe the settings should save when you power down the radio, I haven't played with the feature that much.

    I'm not sure if this feature is standard. My VX-P829 with the CE106 Talon software and federal firmware is what I've tested this process with.