Results 1 to 2 of 2

Thread: MT1000 PL and DPL Encoding

  1. #1
    Join Date
    Jun 26, 2012
    New York
    Thanked 48 Times in 24 Posts

    Default MT1000 PL and DPL Encoding

    Just wanted to pass something along that I have found out and that I haven't come across on the internet. If this is already out there then I apologize.

    Some of you may already know but for those who don't, if you have the PAC-RT setting enabled on channel that obviously uses PL or DPL on TX, if you set the toggle switch to the MON position it will disable the PL on TX. Setting the PAC-RT setting disabled will fix this.

  2. #2
    Will No Longer Registered


    That IS a very valuable tool to have in a radio that does not have a bunch of channels for disabled TX tone so as not to bother the home office....