Results 1 to 4 of 4

Thread: CP200 housing change

  1. #1
    Join Date
    Apr 20, 2012
    Location
    Atlanta, GA
    Posts
    57
    Thanks
    22
    Thanked 30 Times in 15 Posts

    Default CP200 housing change

    Can anyone provide a quick and dirty how to for changing a CP200 housing? Have a service manual but it appears to be mostly circuit diagrams. Just need to swap the old busted housing.

    Thanks!
    "Never do anything you wouldn't want to explain to the paramedics"


  2. #2
    Join Date
    Dec 12, 2011
    Location
    Avalon
    Posts
    1,201
    Thanks
    274
    Thanked 314 Times in 152 Posts
    Country: United States

    Default

    Remove the antenna, battery and any audio accessories
    Remove knobs by grasping firmly and pulling straight up
    Gently pry at the bottom of the case to open it up. Use a thin but broad metal object to do so. A good butter knife often works. don't be Hercules or you break it.
    Slide the radio out and disconnect the speaker connector (and possibly a mic as well)
    Move the speaker and stuff to the new case
    Reassemble

    Its really one of the easiest Moto's to work on.

  3. #3
    Join Date
    Apr 20, 2012
    Location
    Atlanta, GA
    Posts
    57
    Thanks
    22
    Thanked 30 Times in 15 Posts

    Default

    Thats what I needed, thanks Figured it was similar to others but didn't wanna break some magical hidden tab lol.
    "Never do anything you wouldn't want to explain to the paramedics"

  4. #4
    firefox No Longer Registered

    Default

    the Motorola cp200 are cool, thanks