Results 1 to 5 of 5

Thread: VK3RPT P25 70cm Repeater

  1. #1
    VK3BLS No Longer Registered

    Default VK3RPT P25 70cm Repeater

    Hi all,

    I would like to thank all involved in the setting up and for donating towards the repeater. We are almost done just have to put the new antenna in. I would like to thank:
    Silvercomm for site access and the use of there tower.
    Adam VK3FCCC for help getting the repeater hardware up on the site and the installation of the antennas on the tower (big thanks)
    Damien VK3RX for his donation (big help)!!! Matt VK2LK in Sydney for the repeater hardware upgrade (big thanks)!!!
    Adam VK3XO for helping to test.
    Tom VK3TZT for helping to test.

    Thanks for your support with this project and hope to talk to you all soon on VK3RPT
    439.525
    -5MHz
    NAC 293
    CTCSS 91.5Hz

    73's
    Ben
    VK3BLS


  2. #2
    Join Date
    Apr 09, 2012
    Location
    Australia
    Posts
    944
    Thanks
    297
    Thanked 694 Times in 258 Posts
    Country: Australia

    Default

    Hi Ben,

    Glad to be of assistance - I hope to get down there someday to check it out (maybe during the next RUXCON)

    Cheers,
    Matt

  3. #3
    mtp850 No Longer Registered

    Default

    Gents, what hardware have you gone with ?

  4. #4
    spectreman No Longer Registered

    Default

    Ben, you have done a great job. Was great using the repeater last week. Hope to be using it a lot more soon.
    Cheers, Chris.

    Sent from my Sony Tablet P using Tapatalk 2

  5. #5
    VK3BLS No Longer Registered

    Default

    The repeater is a
    Motorola Quantar 110w unit, duplexer is an RFS 19" rack mount notch/band pass type and the antenna is an RFI COL8 6dbd vertical.
    Cable is LDF550 for the main feeder.