Results 1 to 5 of 5

Thread: XTS 5000 Narrowbanding

  1. #1
    RSQCali No Longer Registered

    Default XTS 5000 Narrowbanding

    I'm having a little difficulty with my XTS5000. I've been slowly figuring it out and got most of it squared away, but it will not let me change the Tx Channel spacing from 25 to 12.5. Help please. Mine is a XTS5000 m3 Firmware 17.01.01 Model H18QDH9PW7AN


  2. #2
    Join Date
    Feb 15, 2012
    Posts
    168
    Thanks
    26
    Thanked 89 Times in 45 Posts
    Country: United States

    Default

    Are the frequencies where you're trying to change this analog or digital, and are they secure or clear (or selectable)?

  3. #3
    Join Date
    Dec 12, 2011
    Location
    Avalon
    Posts
    1,229
    Thanks
    353
    Thanked 367 Times in 176 Posts
    Country: United States

    Default

    Analog secure channels must be 25k, this may be your issue.
    "Don't worry about what I am, cause I'm a state agent so what you need to do is make sure your doing the right thing **** boy" -J. Dewitte

  4. #4
    Join Date
    Feb 15, 2012
    Posts
    168
    Thanks
    26
    Thanked 89 Times in 45 Posts
    Country: United States

    Default

    This is what usually bites me on the APX CPS. Probably the OP's issue too.

  5. #5
    Join Date
    Jun 10, 2012
    Location
    The Old Dominion
    Posts
    189
    Thanks
    146
    Thanked 52 Times in 36 Posts
    Country: United States

    Default

    Are you trying to change the drop-down menu in the Personality assignment to zone window? If so, you change it by changing the TX deviation drop-down menu from 5 kHz to 2.5 kHz. The 25 kHz spacing will then change to 12.5. I still don't know why they did it that way.