Results 1 to 4 of 4

Thread: APX channel select issue

  1. #1
    Join Date
    Apr 20, 2013
    Posts
    7
    Thanks
    0
    Thanked 2 Times in 1 Post

    Default APX channel select issue

    Unless there is a CPS setting for this somewhere I seem to have discovered a defect with the APX series with channel selection on the rotary control.

    Steps to reproduce:

    1) With the radio on, note the selected channel.
    2) Turn the radio off and select a different channel.
    3) Turn the radio back on and the channel remains the same as in step 1.

    While making any further selection properly places you on the correct channel, you still have to make more steps (forward and backward on the knob) to correct the error.

    I've tried searching around a bit but can't seem to find any reference to this issue. I know it seems petty, but it bothers me having now run into it.

    This does not seem to occur with the ASTRO25 series.
    Last edited by mdodd; Jun 08, 2013 at 03:20 AM.


  2. #2
    Join Date
    Dec 12, 2011
    Location
    Avalon
    Posts
    1,229
    Thanks
    353
    Thanked 367 Times in 176 Posts
    Country: United States

    Default

    Look on radio wide or ergonomics wide. Its a check box for power on on last selected zone and channel. Uncheck that and it will behave.

    Sent from my Droid RAZR
    "Don't worry about what I am, cause I'm a state agent so what you need to do is make sure your doing the right thing **** boy" -J. Dewitte

  3. #3
    Join Date
    Apr 20, 2013
    Posts
    7
    Thanks
    0
    Thanked 2 Times in 1 Post

    Default

    Yes, that did it! Thanks.

  4. #4
    Join Date
    Nov 28, 2012
    Posts
    48
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Hi Matt; Welcome to the group! I had it set up to always return to Zone 2 Channel 1 glad you got it corrected. Bill