Results 1 to 9 of 9

Thread: XTL5000 05 head manuals

  1. #1
    Join Date
    Feb 04, 2012
    Posts
    2,079
    Thanks
    282
    Thanked 1,013 Times in 451 Posts

    Default XTL5000 05 head manuals

    Has anyone got the BSM/DSM with the information for the 05 controlhead? I am looking for the part number for the plastic frame between the head and the brick. The frame I have is 1585245E01. Either this is not the correct part or the mounting screws supplied are too short and I will need the part number for the correct screw.


  2. #2
    Join Date
    Mar 05, 2012
    Posts
    239
    Thanks
    43
    Thanked 90 Times in 59 Posts

    Default

    I have the DSM for the O5 ....actually forgot I had it and just stumbled on it a few days ago.

    Let me look when I get a moment.

  3. #3
    Join Date
    Mar 05, 2012
    Posts
    239
    Thanks
    43
    Thanked 90 Times in 59 Posts

    Default

    I have the DSM for the O5 and it only really covers the internals.

    I did look at the one I have for the dashmount O5 adapter plastic and it has 15-85245E02 stamped on it

  4. #4
    Join Date
    Mar 05, 2012
    Posts
    239
    Thanks
    43
    Thanked 90 Times in 59 Posts

    Default

    Also the screws are pretty long and the same ones used on the W series dashmount...I usually just re-use the screws that were already there.

  5. #5
    Join Date
    Mar 05, 2012
    Posts
    239
    Thanks
    43
    Thanked 90 Times in 59 Posts

    Default

    What you want is actually in the XTL BSM figure 11.6 0364332H02 are the screws

  6. #6
    Join Date
    Feb 04, 2012
    Posts
    2,079
    Thanks
    282
    Thanked 1,013 Times in 451 Posts

    Default

    JRY thank you for the reply. Once I knew to look for the right BSM the part I need is the 02 and not the 01.

    If you have the DSM .pdf for the 05 head if you can upload it would be great. I hve ,located the BSM from the XTL5000 manuals thread here in the manuals forum. The only DSM I have 68P81096C74-B and this only covers the W series heads.
    Last edited by Notarola; Sep 06, 2013 at 08:21 PM.

  7. #7
    Join Date
    Mar 05, 2012
    Posts
    239
    Thanks
    43
    Thanked 90 Times in 59 Posts

    Default

    only have the hard copy of the O5 DSM. Ordered it years ago after the O5 heads had been out for awhile.
    Was catching up on some bench repairs and noticed the same thing that you had the W Series dashmount plastic which is why the screws were too short.

  8. #8
    PRC148 No Longer Registered

    Default XTL5000 DSM for Control Head

    6816879H01-A.pdf

    DSM for the 05 control head

  9. #9
    Join Date
    Feb 04, 2012
    Posts
    2,079
    Thanks
    282
    Thanked 1,013 Times in 451 Posts

    Default

    Thanks PRC148 thats exectly what I needed.

    JRY I have ordered in the correct plastic spacer. Again thanks for the help