Results 1 to 5 of 5

Thread: Mid power XTL2500 and Siren amp...

  1. #1
    Join Date
    Jul 12, 2013
    Location
    U.S.A.
    Posts
    19
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Mid power XTL2500 and Siren amp...

    I am looking to see if anyone would have a schematic of how to make a siren to "J100" Trapezoidal Accy connector on the back of my XTL2500 Mid power unit??? I have a cable from my 100watt Astro/Spectra and W3 control head setup. I might need to convert from 25pin (older) to the 26 pin (newer) connector. Any Ideas, please feel free to let me know. Also in programming, there is an option under siren to have a Federal Signal SS2000 connected as well, any ideas on how this is done??


  2. #2
    Join Date
    May 23, 2012
    Posts
    149
    Thanks
    110
    Thanked 126 Times in 55 Posts
    Country: Canada

    Default

    The only way that you can interface the Motorola siren amp to the XTL2500 brick is through the 25 pin legacy accessory connector on the TIB of a remote mounted unit.

    The SS2000 is connected to the XTL through the SS2000 head to serial adapter made for the touchscreen software implementation, and a custom cable from that to the XTL.

  3. #3
    Join Date
    Jul 12, 2013
    Location
    U.S.A.
    Posts
    19
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    I have the touchscreen/serial adapter. Any idea where I can get a diagram of the cable I would need??

  4. #4
    Join Date
    May 23, 2012
    Posts
    149
    Thanks
    110
    Thanked 126 Times in 55 Posts
    Country: Canada

    Default

    Good news,

    I happened to put my hands on the manual that outlines the system. Keep us posted!
    Attached Files Attached Files

  5. #5
    Join Date
    Jul 12, 2013
    Location
    U.S.A.
    Posts
    19
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Thank you very much for posting the .pdf.... Very much appreciated... I am working on my "little project" as we speak..