Results 1 to 3 of 3

Thread: HT1000 recase issue

  1. #1
    Join Date
    Nov 29, 2012
    Location
    NC
    Posts
    50
    Thanks
    4
    Thanked 0 Times in 0 Posts

    Default HT1000 recase issue

    I recased an OLD HT1000 with a New case I have ,but it's missing the small spring loaded plug in the accessory connector. I have a box of old cases to rob one from ,but how do you get it out ?


    These are the parts from the service manual;

    3205160W01 SEAL

    2205159W01 PIN

    Both are listed as Actuator for S101
    SD70MAC out

    My collection; XTS5000 M3 VHF FPP, XTS2500 M3 800, XTS3000 M3 VHF, XTS3000 M1 VHF, HT1000 VHF DTMF, Astro Spectra W3 VHF, Astro Spectra W9 VHF 100w,Astro Spectra W7 800, 2 CDM1550LS+ VHF 160ch ,CDM1550 X VHF 25w, CDM1550LS+ UHF 160ch, XPR4500 Q and CDM1250 42-54 .


  2. #2
    Will No Longer Registered

    Default

    Hi there, MAC. You only need that plunger actuator if you use the P. S. speaker mic with the antenna on it. It switches the radio over to the ext antenna contacts on the side connector. The plunger pops out of the housing.

  3. #3
    Join Date
    Nov 29, 2012
    Location
    NC
    Posts
    50
    Thanks
    4
    Thanked 0 Times in 0 Posts

    Default

    Hello Will ,I will have to see if I can force one out of an old case. I may just seal it shut ,I don't need that option.

    Thanks
    SD70MAC out

    My collection; XTS5000 M3 VHF FPP, XTS2500 M3 800, XTS3000 M3 VHF, XTS3000 M1 VHF, HT1000 VHF DTMF, Astro Spectra W3 VHF, Astro Spectra W9 VHF 100w,Astro Spectra W7 800, 2 CDM1550LS+ VHF 160ch ,CDM1550 X VHF 25w, CDM1550LS+ UHF 160ch, XPR4500 Q and CDM1250 42-54 .