Results 1 to 18 of 18

Thread: Looking for i20r Repeater Interface Manuals

  1. #1
    Join Date
    Dec 21, 2011
    Posts
    4,131
    Thanks
    2,776
    Thanked 4,931 Times in 1,469 Posts
    Country: Canada

    Post Looking for i20r Repeater Interface Manuals

    Wanted: Operations or service manual for the Motorola i20r repeater interface controller.

    --

    If this request is fulfilled, I will move the thread into the Service Manual forum.

    Thanks guys


  2. #2
    Join Date
    May 22, 2012
    Posts
    609
    Thanks
    206
    Thanked 260 Times in 130 Posts
    Country: United States

    Default

    I have the i50r manual, would this help?

  3. #3
    Join Date
    Dec 21, 2011
    Posts
    4,131
    Thanks
    2,776
    Thanked 4,931 Times in 1,469 Posts
    Country: Canada

    Default

    They're actually for another member of the forum who emailed me this morning. Let me forward him this thread. Thanks man!

  4. #4
    Join Date
    Feb 22, 2012
    Posts
    25
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Default

    Hi Guys. Thanks very much. If you have a soft copy of the i50R manual I'll take a look at it to see if the functions are similar, but that controller is a little more advanced, with telephone interconnect capabilities I think.

    Randy

  5. #5
    cyrus's Avatar
    cyrus is offline Trailer Park Superintendent
    Join Date
    Jan 05, 2012
    Location
    Moonbase Alpha
    Posts
    773
    Thanks
    132
    Thanked 273 Times in 125 Posts
    Country: Japan

    Default

    If all else fails:

    Item Number. 6880904Z40

    I20R SERVICE MANUAL
    Unit of Measure: 1 EA

    Cost is around $30 Cdn.
    Cyrus

    Bubbles: I'd like to see that Red Blue Green c***sucker put one of those together, duct-tapin' it.

  6. #6
    Join Date
    May 22, 2012
    Posts
    609
    Thanks
    206
    Thanked 260 Times in 130 Posts
    Country: United States

    Default

    Here is the i50R manual!
    Attached Files Attached Files

  7. #7
    Join Date
    Feb 22, 2012
    Posts
    25
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Default

    Nice scan! Thanks alot. Some of the setup functions are similar, I realize that I have to change my radio programming to optimize the use of the i20R. I think somebody is sending me an i20R manual, I will post it here once it arrives so it can be added to the information posted on site.

    Randy

  8. #8
    Join Date
    Feb 13, 2012
    Posts
    167
    Thanks
    84
    Thanked 14 Times in 9 Posts

    Default

    i20r.pdf

    Here is the I20R manual. Have fun!

  9. #9
    Join Date
    Feb 04, 2012
    Posts
    1,677
    Thanks
    79
    Thanked 373 Times in 194 Posts

    Default

    Anyone had luck running the RSS on a windows machine? Dosbox dosnt like it it probably needs to run too slow.

  10. #10
    Join Date
    Feb 22, 2012
    Posts
    25
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Default

    Hey Jay, thanks alot. Thats a good scan. Reading the manual, it definetly was required to properly adjust the i20R.

    Notarola, I run the prog on my 1.4 ghz windows laptop. I have configured the laptop to boot dual boot either real dos or xp with a menu selection on bootup. Its the only way to go, and it runs dos real fast, hehe. You also need to disable buffers, which there is no selection to do so in the cmos setup of my laptop. However, if I boot without the power supply connected, I have the cpu set for powersave mode, which slows it down a bit. So, yes, boot into real dos, your pentium should do it. Probably the easiest way for you to boot into read dos if your not a hardcore dos fan like myself, is to make a bootable dos diskette. You can also try to disable your cpu buffers and try dosbox, it might work.

    Randy

  11. #11
    Join Date
    Dec 21, 2011
    Posts
    4,131
    Thanks
    2,776
    Thanked 4,931 Times in 1,469 Posts
    Country: Canada

    Default

    FYI guys, I copied both the i50R and i20R manuals/posts into the service manual/infrastructure forum. Thank you very much for contributing.

  12. #12
    Join Date
    Feb 04, 2012
    Posts
    1,677
    Thanks
    79
    Thanked 373 Times in 194 Posts

    Default

    Fail999

    Ill give it a try fortunatly I have an old 25 meg machine I keep alive for such uses, so have no troubles running the RSS should I need to in the field. Its just convenient sometimes to be able to run a program on this computer to answer a help needed question.

  13. #13
    Join Date
    Feb 22, 2012
    Posts
    25
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Default I20R manual update

    Hi guys. There is nothing wrong with the manual currently updated, however, I have an original scan here, with manual updates, slightly more recent. I will attempt to upload to the site.

    thanks,

    Randy

    Quote Originally Posted by Notarola View Post
    Fail999

    Ill give it a try fortunatly I have an old 25 meg machine I keep alive for such uses, so have no troubles running the RSS should I need to in the field. Its just convenient sometimes to be able to run a program on this computer to answer a help needed question.

  14. #14
    Join Date
    Dec 08, 2012
    Posts
    128
    Thanks
    0
    Thanked 8 Times in 5 Posts

    Default

    Which version of the RSS does the i50r/i20r need? I'm running R01.00.00 of the Europe GR300/M120... RSS and it complains about lack of model definition file whenever I bring it into repeater mode. Insights?

    Edit: I found that USA V. 5 appears to work.
    Last edited by broadcom; Jan 05, 2013 at 10:20 AM.

  15. #15
    Join Date
    Feb 13, 2012
    Posts
    167
    Thanks
    84
    Thanked 14 Times in 9 Posts

    Default

    The I20R has stand alone RSS, you can't program it with the GM300 software.

  16. #16
    Join Date
    Dec 08, 2012
    Posts
    128
    Thanks
    0
    Thanked 8 Times in 5 Posts

    Default

    Quote Originally Posted by Jay View Post
    The I20R has stand alone RSS, you can't program it with the GM300 software.
    Anybody know if it's the same for the i50r?

  17. #17
    Join Date
    Feb 13, 2012
    Posts
    167
    Thanks
    84
    Thanked 14 Times in 9 Posts

    Default

    HVN9085 is the I20R RSS package, and it does only the I20R.

  18. #18
    Will No Longer Registered

    Default

    Quote Originally Posted by d119 View Post
    Here is the i50R manual!
    Hey, that one IS upside-down, .................