Results 1 to 3 of 3

Thread: XTL5000 Receive Issue

  1. #1
    Join Date
    Apr 14, 2012
    Location
    Pittsburgh, PA
    Posts
    43
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default XTL5000 Receive Issue

    The XTL 5000 in my truck has been acting up lately and I'm not sure why. When I have the radio on scan, I can hear all of the transmissions just fine. Now when I'm working at an incident I take the radio off scan and move to the freq. that we're operating on and I cannot hear the audio. The receive led is lit up telling me that there's communication incoming; however, I cannot hear that audio. I tried reprogramming the radio and tweaking a few fields but it still didnt help the problem. I know its porbably something stupid that needs changed, but I don't know what to change.

    Thanks,
    Mike


  2. #2
    Join Date
    Feb 04, 2012
    Posts
    1,674
    Thanks
    79
    Thanked 370 Times in 192 Posts

    Default

    did you recently reprogram the unit or did this start all by itsself? If you reprogrammed is it a conventional or trunked channel? a few suggestions

    check the unmute rule and PL/DPL the same for any signalling.

    if trunked make sure its set to digital or analog.

  3. #3
    Join Date
    Apr 14, 2012
    Location
    Pittsburgh, PA
    Posts
    43
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Actually that was the ticket. I had to change the Receive to standard from the and/or combos.

    Thanks for the continued level of impressment from you all.