Communications Support Forums
Hello,
I am having an issue with an APX7000 VHF/UHF1 rear display. The display functions properly at startup and is set to have a 15 sec backlight turn off. All of which function as expected...for exactly 3 minutes from turning on the radio. At this point the rear display goes completely off. No backlight or display, even when BL manually toggled on with a programmed side key. No buttons, switches, ect will change this no display state. Top display functions as expected. The only way to get the rear display to work again is to cycle power on the radio.
I am fairly certain that this radio is an ALT radio. It works perfectly otherwise presently. That being said, radio info as follows:
Host and DSP Version are R05.00.00
64Meg
Flash type P30 130nm dual
Flashcode 9A4218-011692-0
Tuning Version R01.10.02
Proc Version OMAP 1710
CPS Version is the most current, I believe it is 20.01. It is the most current from MOL.
Thanks in advance!
I am having an issue with an APX7000 VHF/UHF1 rear display. The display functions properly at startup and is set to have a 15 sec backlight turn off. All of which function as expected...for exactly 3 minutes from turning on the radio. At this point the rear display goes completely off. No backlight or display, even when BL manually toggled on with a programmed side key. No buttons, switches, ect will change this no display state. Top display functions as expected. The only way to get the rear display to work again is to cycle power on the radio.
I am fairly certain that this radio is an ALT radio. It works perfectly otherwise presently. That being said, radio info as follows:
Host and DSP Version are R05.00.00
64Meg
Flash type P30 130nm dual
Flashcode 9A4218-011692-0
Tuning Version R01.10.02
Proc Version OMAP 1710
CPS Version is the most current, I believe it is 20.01. It is the most current from MOL.
Thanks in advance!