• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

FAIL 01/A0

Status
8

800L10

Not Registered
I recently replaced a W7 head with an O5. I used the tool, programmed it with the W7 attached, powered it down, swapped the heads, then powered it up and got this error. The radio is an XTL5K with 15.XX.XX. I can still read/write to it, but I can't get any further than that. I've looked for the error, but no dice. Anyone got a clue?
 
com501

com501

Prolific Contributor
CS Forums $upporter
Joined
Jan 18, 2013
Messages
2,847
Write it back to the W7 and put the W7 head back on with the other front and flex. Does it work normally then?
 
OP
8

800L10

Not Registered
Converted back to a W7...Same result...Fail 01/A0. I think it's time for a very sharp 'Flat rate repair'.
 
com501

com501

Prolific Contributor
CS Forums $upporter
Joined
Jan 18, 2013
Messages
2,847
I have a rifle scope I need to sight in......:p
 
Status