Communications Support Forums
Hi folks!
I used to think it was possible to have both FPP and trunking in an Astro25 radio provided it is upgraded to Host R17.00.01 or something like that or newer. I personally own an XTS2500 and XTS4000 VHF radios that have both options enabled (they were flashed with a genuine Moto software which I can't name here
so they aren't some hack-job from China).
The CPS recognizes both Trunking and FPP in both radios.
FPP works fine in them. Hovewer I haven't come across the trunking programming in them yet. Today I tred to program these radios with a trunking system. Codeplug accepts Trunking System and Trunking Personality, but when it comes to programming a trunked channel in the Zone Channel Assignment the CPS won't let me do it. I can neither select nor manually type Trk instead of Cnv in the channel type field. As I reach it with a cursor it reverts to an arrow with a spectacles indicating that this field is view-only.
What's the deal? My XTS2500 and XTS4000 are both running R20.00.05 firmware and I use CPS R20.01.00. Am I missing something? Is there a way to have both trunking and FPP in an XTS radio (I herd it was possible in CPS 9 or earlier, not sure about the firmware)
Thanks in advance!
I used to think it was possible to have both FPP and trunking in an Astro25 radio provided it is upgraded to Host R17.00.01 or something like that or newer. I personally own an XTS2500 and XTS4000 VHF radios that have both options enabled (they were flashed with a genuine Moto software which I can't name here
so they aren't some hack-job from China).The CPS recognizes both Trunking and FPP in both radios.
FPP works fine in them. Hovewer I haven't come across the trunking programming in them yet. Today I tred to program these radios with a trunking system. Codeplug accepts Trunking System and Trunking Personality, but when it comes to programming a trunked channel in the Zone Channel Assignment the CPS won't let me do it. I can neither select nor manually type Trk instead of Cnv in the channel type field. As I reach it with a cursor it reverts to an arrow with a spectacles indicating that this field is view-only.
What's the deal? My XTS2500 and XTS4000 are both running R20.00.05 firmware and I use CPS R20.01.00. Am I missing something? Is there a way to have both trunking and FPP in an XTS radio (I herd it was possible in CPS 9 or earlier, not sure about the firmware)
Thanks in advance!