• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

Genfit DMR Software Question

Status
S

smorris281

Not Registered
Hey guys, I am running the Genfit software on my windows 7 32 bit machine. I had it working before but, now it won't decode anything. I click run as administrator and even disabled my firewall. Slot 1 set to 192.168.10.1 slot 2 192.168.10.2 Any thoughts?
 
R

radiotechs

Contributing Member
Joined
Nov 26, 2014
Messages
57
smorris281 said:
Hey guys, I am running the Genfit software on my windows 7 32 bit machine. I had it working before but, now it won't decode anything. I click run as administrator and even disabled my firewall. Slot 1 set to 192.168.10.1 slot 2 192.168.10.2 Any thoughts?
Click to expand...

It is definately within coverage of the system being monitored ?
Set to Control station ?
The control station radio has the 192.168.10.1 address and not one someone has changed to another static ?

I dont have Genfit in front of me at the moment but should be straight forward
 
OP
S

smorris281

Not Registered
I am within range of the repeater. I notice whenever I push the PTT, instead of the group ID and radio number being displayed, the screen stays blank and i hear the sound when a USB device is removed from the computer. You know what sound i mean?? Weird.
 
Status