• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

Importing to the Unified Call List

Status
V

Vic Langrehr

Not Registered
I am trying to import a lot of ID's into the unified call list. I am trying to use http://www.akardam.net/moto/tools/apxuclbuilder.pl xml generator but I am having limited success. I am not worried about hot lists at all for importing. I have about 500 radios that have 2 trunking system ID's and 1 MDC ID that I want to use to create the UCL. I am using APX CPS version 14.00.00 and this is an APX 6000 codeplug. Does anybody have more detailed instructions on how to use the xml generator or another method. Thoughts?

Thanks in advance for your time,
Vic
:confused:
 
OP
V

Vic Langrehr

Not Registered
I figured it out!

I figured it out. The problem was that one of contact names included an "&" symbol. So even though this is a valid character in radio it was stopping the import operation from completing successfully. The one I found was the name on my spreadsheet was "R&B Office" and I changed it to "R-B Office" and then import succeeded.

Vic
;)
 
Status