• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

Is it Possible MTR3000(Analog Repeater) & MTR3000(Digital Repeater Slot 2)

Status
D

DS3DFC

Not Registered
hello Sir~~

I'll operate Anlaog & Digital System.

Analog Radio group Talk To Digital Radio Group each other


is it Possible to connet

MTR3000(Analog Repeater) & MTR3000(Digital Repeater Slot 2 / IPSC Mode: slot 1 = WAC, Slot 2 = LAC for Analog Bridge) by Cable (ex. DB25)


Please Please ~~~
 
Bill_G

Bill_G

Prolific Contributor
Joined
Jan 31, 2015
Messages
853
Not that I'm aware of. You'd need a pair of radios to act as a gateway. Think of it as crossbanding.
 
OP
D

DS3DFC

Not Registered
DS3DFC said:
hello Sir~~

I'll operate Anlaog & Digital System.

Analog Radio group Talk To Digital Radio Group each other


is it Possible to connet

MTR3000(Analog Repeater) & MTR3000(Digital Repeater Slot 2 / IPSC Mode: slot 1 = WAC, Slot 2 = LAC for Analog Bridge) by Cable (ex. DB25)


Please Please ~~~
Click to expand...

슬라이드1.JPGour system topology
 
Bill_G

Bill_G

Prolific Contributor
Joined
Jan 31, 2015
Messages
853
DS3DFC said:
View attachment 7161our system topology
Click to expand...

Thanks. Your drawing helps clarify. I'm not a Trbo product expert, and I cannot say for sure if either the analog mode MTR3K expansion port, or the digital mode Trbo mobile accy port will support this. I've read elsewhere that many common functions do not exist on these products in digital mode. I'm reasonably certain Site Connect doesn't work on a MTR3K in analog mode, but I could be wrong.
 
Status