KNG P400 Firmware

twowayradio13669

Regular Member
Joined
Sep 7, 2019
Messages
17
Trying to update a BK KNG-P400 so this it will work on the 5.5.0 software how ever I can not get any of the firmware located on the BK site to work. I have made sure the unit is in updating mode (blue light) and have had no success.

Has anyone had any success ?

5.5.0 wont write a file to the unit and I don't have the older software

Currently-
Release- 1.5.3.0
Software 5.3.0
 

Gtaman

Prolific Contributor
CS Forums $upporter
Joined
Apr 27, 2013
Messages
340
Trying to update a BK KNG-P400 so this it will work on the 5.5.0 software how ever I can not get any of the firmware located on the BK site to work. I have made sure the unit is in updating mode (blue light) and have had no success.

Has anyone had any success ?

5.5.0 wont write a file to the unit and I don't have the older software

Currently-
Release- 1.5.3.0
Software 5.3.0
Download the latest firmware and it should include the latest lightning light. Run that and it should burn it. Make sure you actually have a KNG-P400 and not a P400S
 
  • Like
Reactions: ndp

ndp

Prolific Contributor
CS Forums $upporter
Joined
Mar 12, 2019
Messages
228
Yeah, I just did this earlier in the week to get mine from ebay going. You should be able to download any of those firmware files with the simple info form on the downloads page. Installed LightningLight like Gtaman says, make sure the radio is in the flash mode with the blinking blue light. Took about 30 seconds.
 
OP
T

twowayradio13669

Regular Member
Joined
Sep 7, 2019
Messages
17
Thanks. I did try the firmware and could not get it to write. I did have it in firmware mode with the blue light flashing. Will try again in the morning
 

ndp

Prolific Contributor
CS Forums $upporter
Joined
Mar 12, 2019
Messages
228
1613197045554.png

Here's a screenshot of how I had mine set up. I don't have the radio connected, so the start button is greyed out. Silly question but do you have the wrong build selected in the left box? Mine is a P400 as well. Portable-G2 is for the KNG2 series that just came out not too long ago.
 
OP
T

twowayradio13669

Regular Member
Joined
Sep 7, 2019
Messages
17
I was able to get it to work with no issues on the old programming laptop (windows 7) thanks
 

Mountain_Comm

Regular Member
Joined
Feb 27, 2021
Messages
11
only because I am testing this for my agency. 5.5.0.p FW must use 5.5.9RES. this is direct from BK Tech. So far from what I have found is it is a bunch of fixes. we tried 5.5.0m and had issues. 5.5.9 RES does seem to have several change although I haven't been through them. I updated the FW on a few portables read and reflashed with new RES
 

ndp

Prolific Contributor
CS Forums $upporter
Joined
Mar 12, 2019
Messages
228
Interesting. I've been using 5.5.8 with 5.5.0p firmware and haven't had any problems. Will download and install 5.5.9 and check it out.
 

Gtaman

Prolific Contributor
CS Forums $upporter
Joined
Apr 27, 2013
Messages
340
I use software 5.8.9 no issue so far besides the bugs with writing GPS parameters.