More than 15 channels scanned in a Zone. DGP5550/XPR7550.

[Yoshisan]

Hi to all of you.

I wanna to ask if some of you has found a trick to program more than 15 channels in a scan list? Seems to me that there was a conversation thread about it, and a solution about it of course.

I've duplicated 45 channels in one specific zone, and I built three scan lists; the last channel in one list have a reference, or pertenence, to a second list and so on. The last channel of the scan list, have a reference to the first list, hoping to create a loop.

This works, but only if I move the channel control to a channel that belongs to another scan list. So, no results at all.

If any of you could give me a help, I would be very grateful. 73.

Fernando
CE2DJA

 

[Mars]

Hi Fernando,

Any discussion on this would likely involve modifying the CPS (software) or the codeplug. Both of those undertakings would involve copyright infringement. Motorola has made it very clear to us we are not to discuss any of these activities any longer.

Thanks for understanding!

 

[SwissMoto]

If you only want to scan lots of talkgroups (more then 16) on a same frequency you can create several channels in a zone that carry 16 talkgroups each from your RX group lists.
You then put these "special" channels in your scan list and here you go...