Motorola TDN9390D Cable

Status
Not open for further replies.

bsdam

Contributing Member
CS Forums $upporter
Joined
Oct 2, 2012
Messages
34
I've got a TDN9390D KVL Cable that I'd like to modify to keyload EFJ's as well.

My question is this, how the hell do I get the radio side connector apart without destroying it?

Some of the Non Motorola cables I've seen simply un-snap, but that doesn't appear to be the case for these (unless of course, I'm missing something).

TIA,

-B
 

Mars

Prolific Contributor
CS Forums $upporter
Joined
Dec 21, 2011
Messages
4,899
I used a really small metal pry tool (letter opener) to pop the seam out. Fit it between the outside molding and the rubber gasket. It comes apart easy.
 

xpr8300

Prolific Contributor
CS Forums $upporter
Joined
Mar 1, 2012
Messages
541
Also start at the top (where the cable is coming out) I tend to have an easier time when I work it that way. I also take the rubber part off first and put it on last.
 
OP
B

bsdam

Contributing Member
CS Forums $upporter
Joined
Oct 2, 2012
Messages
34
Thanks gents, I'll give it a shot tonight.
 
Status
Not open for further replies.