Motorola XTS5000 Recieve Delay

[rdamavandi]

HI

I have a Motorola XTS5000 flashed as trunking. When having booth radios on one of my radios starts receiving after a delay. They have the same model number in the UHF range and they looked programed together. There can be a 1-5 second delay. I don't have a delay when pressing the squelch. Thanks for all input and answers.

 

[Mars]

Firmware versions? When were they last aligned?

 

[rdamavandi]

They were booth recently aligned together and they are up to date on firmware. and i forgot to mention that this is on conventional analog.

 

[CQDX]

RX Umute Delay?

 

[rdamavandi]

The RX Unmute Delay is set as 1 (000ms). Any other input or ideas?

 

[moetorola]

They were booth recently aligned together and they are up to date on firmware. and i forgot to mention that this is on conventional analog.

"If posting about a radio issue: Include the HOST, DSP and UCM/secure (if installed) firmware versions, flashcode and CPS version you're using. This is critical information."

Recently aligned together, it's possible they did not align it right.

There is nothing besides the RX unmute delay in the CPS that I can think of.

But a few questions,

Due you have MDC enabled?

Does this happen when scanning / not scanning?

What is your Advanced RF AGC set for? Should be standard, and don't think this would have any effect.

I am leaning towards miss alignment. Need to eliminate Software from Hardware. Maybe send your codeplug to someone with a UHF radio and have them test it. Or just to have a look at the CP.

Did you have issues with these radio's before the alignment?

From another thread of yours:
http://communications.support/threads/9948-XTS5000-Wont-Receive-When-Scan-Is-Off?p=68241#post68241