• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

MT1000 PL and DPL Encoding

Status
Not open for further replies.

kc2obw

Prolific Contributor
Joined
Jun 25, 2012
Messages
274
Just wanted to pass something along that I have found out and that I haven't come across on the internet. If this is already out there then I apologize.

Some of you may already know but for those who don't, if you have the PAC-RT setting enabled on channel that obviously uses PL or DPL on TX, if you set the toggle switch to the MON position it will disable the PL on TX. Setting the PAC-RT setting disabled will fix this.
 
W

Will

Guest
That IS a very valuable tool to have in a radio that does not have a bunch of channels for disabled TX tone so as not to bother the home office....
 
Status
Not open for further replies.