• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

MTS2000 Scan Lists

Status

cul

New Member
Joined
May 4, 2020
Messages
3
I've had a request from someone to change how their MTS2000's Scan Lists work.

Here is what the wrote me saying what they'd like:
"Please fix the scan so each toggle is its own scan list so there is no cross scanning. Right now when I am on one toggle it still scans the other 2."

Is this even possible to do with the MTS2000?

CPS R02.03.00
WinXP
 

crazyboy

Prolific Contributor
CS Forums $upporter
Joined
Aug 21, 2013
Messages
164
I know you're new here but you're going to find out very quickly non specific questions don't get answered and people don't get spoon fed. Perhaps start with what "toggle" is and what you have tried to make this work.
 
OP
cul

cul

New Member
Joined
May 4, 2020
Messages
3
From how they explained it, they wanted the ABC toggle switch to each have their own scan list. I looked around in CPS and figured it wasn't possible. However, I wanted to make sure that I wasn't missing anything.
 

crazyboy

Prolific Contributor
CS Forums $upporter
Joined
Aug 21, 2013
Messages
164
From how they explained it, they wanted the ABC toggle switch to each have their own scan list. I looked around in CPS and figured it wasn't possible. However, I wanted to make sure that I wasn't missing anything.


Sure, make multiple scan lists. Assign them to the personalities in each zone respectively, and don’t add anything from the other zones in the scan lists.
 
OP
cul

cul

New Member
Joined
May 4, 2020
Messages
3
After he gives me the radio then I'll make the scan lists as such. If I run into any issues I'll post them here.
 
Status