Communications Support Forums
Has anyone with a XPR7550 and firmware 2.4 experienced random radio reboots during SCAN operation?
Two users on my network have reported it and I confirmed it on my own radio tonight. All I'm scanning are different talkgroups/timeslots on my own repeater and one analog channel. Just an IPSC system with no beacon transmissions or roaming list implemented. As simple as can be.
Anyone else noticing this? I thought it was someone screwing around with remote disable/enable, but that's not the issue. Neither are dirty battery contacts, etc. Three new portables, all in good condition.
Haven't noticed/confirmed any issues on the SL7550 or the XPR5550 yet.
Two users on my network have reported it and I confirmed it on my own radio tonight. All I'm scanning are different talkgroups/timeslots on my own repeater and one analog channel. Just an IPSC system with no beacon transmissions or roaming list implemented. As simple as can be.
Anyone else noticing this? I thought it was someone screwing around with remote disable/enable, but that's not the issue. Neither are dirty battery contacts, etc. Three new portables, all in good condition.
Haven't noticed/confirmed any issues on the SL7550 or the XPR5550 yet.