Communications Support Forums
I have an XPR8400 running R02.40.01. Every once and a while I will try to key up the repeater (either time slot) and will get a busy signal. The funny thing is, looking at the repeater neither transmit or receive light is on.
Troubleshooting I've tired:
1. Pulling the duplexer and using two antennas - same issue (so I think I've ruled out the duplexer)
2. Switching to another frequency pair that I know works because that repeater doesn't have this issue - same issue (so I think I've ruled out client programming)
I can work around the issue by programming the client radios' Admit Criteria to "Always" (even "Color Code Free" has the same issue), but that feels like masking a problem. Anything else I should try?
Troubleshooting I've tired:
1. Pulling the duplexer and using two antennas - same issue (so I think I've ruled out the duplexer)
2. Switching to another frequency pair that I know works because that repeater doesn't have this issue - same issue (so I think I've ruled out client programming)
I can work around the issue by programming the client radios' Admit Criteria to "Always" (even "Color Code Free" has the same issue), but that feels like masking a problem. Anything else I should try?