• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

Strange MDC1200 issue with XPR5550

Status
Vocoder

Vocoder

Prolific Contributor
CS Forums $upporter
Joined
Feb 25, 2015
Messages
106
Howdy. I am seeing a strange issue here. I have a scan list comprised of DMR talkgroups from 2 systems and some analog channels. One or two of the analog channels have MDC1200 enabled. There may be 8 or 10 channels total in the list.

When scanning that list, the MDC1200 falses every few seconds with bogus ID's in rapid order. (0407,1111,0350) all in the span of 2 seconds. This is true if the radio is parked on an MDC-enabled channel or not, and the radio stays muted. XPR5550 with the most recent firmware.

Any ideas?
 
slapshot0017

slapshot0017

Prolific Contributor
Joined
Mar 25, 2015
Messages
247
Sounds like the PL for Data issue I've had. You may have some other departments with the same frequencies around you. Just check the box that says PL for data in each channel.
 
OP
Vocoder

Vocoder

Prolific Contributor
CS Forums $upporter
Joined
Feb 25, 2015
Messages
106
slapshot0017 said:
Sounds like the PL for Data issue I've had. You may have some other departments with the same frequencies around you. Just check the box that says PL for data in each channel.
Click to expand...


Apologies for the late response - been away from the DMR radio for a bit. I attempted to check that box, and realized doing so will break the MDC1200 on channels that have it...
 
Status