• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

XPR 4550 TX LED.

Status
P

ParamedicPR835

Not Registered
Is there a way in the CPS or Tuner to change the default LED use to identify when the radio is on TX mode ? As of now it uses the green LED on both RX and TX mode and I would like it to be green on RX and red on TX. Thanks in advance.
 
Mars

Mars

Prolific Contributor
CS Forums $upporter
Joined
Dec 21, 2011
Messages
4,991
Unfortunately, no. For whatever the reason, Motorola decided to make the TX LED green, instead of red. In some MOTOTRBO radios, the LEDs are multi-colored and can be re-provisioned (firmware) to be RED on TX, but apparently this slipped their mind.

The MOTOTRBO radio line is the only family which uses a green TX LED. The only other "green TX LED" radio is the XTS5000, which when equipped with a CCI vocon, with a CCI module, loaded with a Type I algorithm, will TX with a green LED.
 
OP
P

ParamedicPR835

Not Registered
I suspected that. Thanks a lot for the information.
 
X

xpr8300

Prolific Contributor
CS Forums $upporter
Joined
Mar 1, 2012
Messages
635
The cp185 also uses a green tx led. So stupid
 
Status