• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

XPR 5550 - Invalid accessory

Status
kc8onr

kc8onr

Regular Member
CS Forums $upporter
Joined
May 31, 2013
Messages
20
Hello all ,

Tonight I was working on programming a few DMR-MARC repeaters into my radio. I wrote to the radio and it was successful , unplugged the programming cable everything was normal. Went to plug in the RMN5052A MIC that came with the radio and I get an "Invalid Accessory". I tried writing my original codeplug in and its still doing the same thing.

Im at a loss , any help or explanation why this happen would be awesome.

Thanks in advance
Dan
 
Mars

Mars

Prolific Contributor
CS Forums $upporter
Joined
Dec 21, 2011
Messages
4,991
Have you tried unplugging the radio, then plugging it back in?

What firmware and CPS versions are you using?
 
OP
kc8onr

kc8onr

Regular Member
CS Forums $upporter
Joined
May 31, 2013
Messages
20
Mars said:
Have you tried unplugging the radio, then plugging it back in?

What firmware and CPS versions are you using?
Click to expand...


Tried that. have looked over my codeplug to make sure I didn't fat finger anything and I can't find anything wrong.

Dan
 

Attachments

  • trbo.jpg
    trbo.jpg
    245.9 KB · Views: 34
Mars

Mars

Prolific Contributor
CS Forums $upporter
Joined
Dec 21, 2011
Messages
4,991
Do you have another microphone you can plug in to test with?

Have you tried a "recovery" option from within CPS? (This fixes any potential codeplug corruption)

Does the radio transmit on analog channels, but not digital? If so, there's a firmware/CPS bug which Motorola is aware of and will be corrected in CPS 12.1 which will be released ASAP.

If you wish, email me your codeplug. marsp25 at gmail, and I'll take a look to see if there's something obvious.
 
OP
kc8onr

kc8onr

Regular Member
CS Forums $upporter
Joined
May 31, 2013
Messages
20
Mars said:
Do you have another microphone you can plug in to test with?

Have you tried a "recovery" option from within CPS? (This fixes any potential codeplug corruption)

Does the radio transmit on analog channels, but not digital? If so, there's a firmware/CPS bug which Motorola is aware of and will be corrected in CPS 12.1 which will be released ASAP.

If you wish, email me your codeplug. marsp25 at gmail, and I'll take a look to see if there's something obvious.
Click to expand...

Tried recovery and its a no go. Thinking it may be a hardware issue.
no PTT on analog or digital
 
Status