XPR 5550 user selected audio profiles

[jwarden]

The manual states that user selected audio profiles are found under Main Menu->Utilities->Radio Settings. I do not find these available here or anywhere else. The radio is an XPR 5550 with R02.40.02 firmware. In CPS 11 all of the available menu items are selected. What is the trick to get this selection available on the radio? The only audio related selection available in Radio Settings is Intelligent Audio (on/off).

 

[bigboyblue]

are you in expert mode in the cps ?

 

[jwarden]

Yes. The problem isn't the CPS. I can select the profiles in CPS. The menu selection isn't showing up on the radio menu...

 

[Mototom]

Make sure you are parked on a digital channel before you go into the menu. The user selectable audio profiles won't show in the menu if you're parked on an analog channel. That's how mine works.

 

[jwarden]

Thanks but it's on a digital channel. I have the selection available on my 7550 but not on the 5550...

Make sure you are parked on a digital channel before you go into the menu. The user selectable audio profiles won't show in the menu if you're parked on an analog channel. That's how mine works.

 

[jwarden]

Problem solved. I put in a new default codeplug and now it all shows up.