• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

XPR4550/XPR5550 - using XML to adjust squelch threshold

Status
G

g8tzl2004

Prolific Contributor
Joined
Mar 12, 2013
Messages
226
Is it possible to adjust the analog squelch threshold by reading codeplugs using XML format.

Compared to my older analog Motorola stuff, I am missing weak but copyable signals with the UHF XPR4550 and XRP5550.

The XPR4550 has a higher SQ threshold although it has a slightly more sensitive RX front end than the XPR5550.
 
Status