• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

XTS3000 Programming Inturuption Failure

Status
Y

yayomoto

Not Registered
I have an old XTS 3000 (R05.02.00 / H09KDC9PW5AN) that I broke a couple days ago as CPS crashed and/or the serial cable bumped loose.

It powers on produces an error beep and nothing works. When I read it in CPS (using SMARTrib) it complains:

"BLOCK CHECKSUM FAILED FOR CONVENTIONAL PERSONALITY BLOCK"
"BLOCK CHECKSUM FAILED FOR INTERNAL RADIO BLOCK"

Finally, the last error is:

ERROR READING FROM IMAGE WHEN ATTEMPTING TO UNPACK EXTERNAL RADIO BLOCK. UNPACK FAILED.

So I opened my cpg backup from several days prior to this, and when writing it tells me my radio codeplug has been inhibited. This is false, plus as I used the code plug up until my CPS blunder.

Any suggestions? Thanks
 

Pezking

Prolific Contributor
CS Forums $upporter
Joined
Nov 11, 2011
Messages
231
Don't post the exact same question twice to two different forums.
 
Status