• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

xts3000 tuner settings?

Status

Randy's

Contributing Member
Joined
Mar 1, 2012
Messages
30
I was going to swap some xts3000 s-records around & was going to make a copy of the tuner settings, but there are no receive settings like there are in the mtsx series. Are they hidden somewhere else or are there any? Thanks Randy
 

Mars

Prolific Contributor
CS Forums $upporter
Joined
Dec 21, 2011
Messages
5,020
There are RX settings for the XTS3000. However, only the VHF and UHF XTS3000s have them.

800 MHz has fixed values. I'm guessing your radio is 800 MHz?
 
OP
R

Randy's

Contributing Member
Joined
Mar 1, 2012
Messages
30
Yes, it's an 800 mhz one, thanks for the info Mars, I had no idea. Do you think swapping some s-records around would be an issue as far a receive only application?
 

Magnus

Prolific Contributor
CS Forums $upporter
Joined
Dec 12, 2011
Messages
1,240
Some of the adjustments on the transmitter side do affect RX as well. Read it with tuner and just write down all the softpot values, shove in your srec and use tuner to restore your values. Unfortunately there is no hack for Astro tuner to save the tuning data.
 
Status