• If posting about a radio issue: Include the HOST, DSP and UCM/secure firmware versions, flashcode and CPS version you're using along with the operating system info. This is critical information.

XTS5000 Wont Receive When Scan Is Off

Status
R

rdamavandi

Regular Member
Joined
Mar 7, 2015
Messages
11
HI

I have a Motorola XTS5000 flashed as trunking that wont receive when scan is off. I am scanning analog conventional with PL tones. I am able to turn scan off on digital and could hear but not with the analog channels. I am also able to receive audio for only a few seconds after I transmit then I cant hear any incoming audio without turning scan on or pressing the squelch button. I went through the whole CPS and can't find anything that could be causing the problem. If you need more info or have questions let me know. Thanks for all input and answers!
 
Alpha

Alpha

T¹ ÆS Ø - Moderator, CS Forums $upporter
Staff member
CS Forums $upporter
Joined
Feb 12, 2012
Messages
2,756
It sounds like you have AND muting turned on. When scanning the PL is defeated, so you hear stuff (with no PL) but when NOT scanning, it's trying to look for PL AND some other condition, like matched MDC unit ID or matched Secure Key to unmute. Setting signalling muting to OR will fix this.
 
T

tsunami_australia

Not Registered
Been there done that in earlier days :(. AND is a PITA.
 
Status